How To Fix Blue Screen Of Death With Command Prompt Windows 10

Read how to fix the error “blue screen” Windows. What are the causes of errors and methods for restoring a non-working computer?

On a computer or laptop running Windows, a “blue screen of death” appeared? Does the system restart after an error message? Are you looking for a BSOD error?

Causes of error

An error may occur if:

• There is not enough space on the hard disk of a computer or laptop. For proper operation of Windows 10 on the system, disk should be free 2 – 10 GB.
• An incompatible BIOS was installed on the computer, or the firmware was damaged.
• Installed are not compatible with OS device drivers.
• Windows registry has been damaged or deleted. Perhaps as a result of cleaning system registry keys were deleted.
• Anti-virus software or computer viruses can block system files or delete important registry keys.
• As a result of errors in the program for backup.
• As a result of updating the Windows OS.

Actual for OS: Windows 10, Windows 8.1, Windows Server 2012, Windows 8, Windows Home Server 2011, Windows 7 (Seven), Windows Small Business Server, Windows Server 2008, Windows Home Server, Windows Vista, Windows XP, Windows 2000, Windows NT.

How to remove the error

Here are some ways to correct the error:

1. Start the computer in “safe mode” ;
2. Update the driver through the Device Manager ;
3. Use sfc / scannow to scan all system files ;
4. Check the Windows disk for errors with the chkdsk command c: / f ;
5. Use compatibility mode with the old version of Windows ;
6. Disable unnecessary programs from Windows startup ;
7. Contact Microsoft Support ;
8. Install the latest system updates ;
9. Run a system scan for viruses ;
10. Perform a RAM check ;

Step 1: Start the computer in “safe mode.”

If the error occurs when Windows starts up and blocks any possibility of working with the system, try turning on the computer in “safe mode.”

This mode is designed to diagnose the operating system (from now on referred to as OS), but the functionality of Windows is very limited.

“Safe Mode” should be used only if system operation is blocked.

To start safe mode, do the following:

1. Go to the Start menu and select Settings.
2. In the options window that opens, go to the Update and Security menu and select the Restore section.
3. In the Restore section, find the Special boot options and click the Reload Now button.
4. After that, Windows restarts and prompts you to select the next action. Select Troubleshooting.
5. In the Troubleshooting menu, click on Advanced Options, then – Download Options.
6. Next, Windows will notify you that the computer can be rebooted using advanced boot options. Specify – Enable safe mode. Click Reload.
7. After the reboot, select Enable Safe Mode by pressing F4.

Step 2: Update the driver through the Device Manager

Have you installed new hardware on your computer? Perhaps you started using a new USB device with your computer.

This could lead to an error. If you installed the device driver using the disk that comes with it or used the driver, not from the official Microsoft website, then the reason is.

You will have to update the device driver to fix this problem.

You can do this manually in Windows Device Manager, follow these instructions:

1. Click the Windows button, then enter Device Manager from the keyboard.
2. Select Device Manager from the list.
3. Browse the list of device categories, click on the arrow next to the category of your new device. The driver can be marked with a yellow triangle.
4. Right-click on the device name and click Update Driver.
5. Next, the Driver Update Wizard window opens with two options:

• Automatic search for updated drivers. Windows will check for the most appropriate driver for this device in automatic mode.
• Run a search for drivers on this computer. Use this option to self-specify the OS driver files.

Restart the computer after installing the driver.

Step 3: Use sfc / scannow to scan all system files.

Damage or overwriting of system files can lead to an error. The sfc command finds damaged Windows system files and replaces them.

1. Click the Windows button, then type cmd using the keyboard.
2. Right click on the CMD and run as administrator.
3. At the command prompt, type sfc / scannow and press Enter.

This process can take several minutes.

Step 4: Check the Windows disk for errors with the chkdsk command c: / f

It is possible that a file system error or the presence of bad disk sectors led to a blue screen.

The CHKDSK command checks the disk for file system errors and bad sectors. Using the / f parameter will cause the program to correct errors Found on the disk automatically, and the / r parameter allows you to find and “fix” problematic disk sectors. To start, follow the instructions:

1. Click the Windows button, then type CMD using the keyboard.
2. Right click on the CMD and run as administrator.
3. At the command prompt, type chkdsk c: / f and press Enter (use the drive letter on which the OS is installed).

Wait until the end of the process and restart the computer.

Step 5: Use the compatibility mode with the old version of Windows

BSOD may cause outdated software. If the error appears after starting the program, the use of Windows compatibility mode will eliminate the appearance of an error.

To fix the problem, follow these instructions:

1. Find the executable file of the program; it has the extension .exe and clicks on it with the right mouse button.
2. In the context menu, specify Fix compatibility issues.
3. The next step is the Compatibility Troubleshooting window. You will have two diagnostic modes available:

• Use the recommended options. Select this option to test run the program using the recommended compatibility settings.
• Diagnostics program. Select this option to select compatibility options based on issues noted.

1. After testing with different versions of Windows and startup options, save the settings for the program.

Step 6: Disable unnecessary programs from Windows startup

The software that calls the blue screen of death can be written into Windows startup, and the error will appear immediately after the system starts up without your participation.

You can remove programs from startup using Task Manager.

1. Boot into Safe Mode.
2. Right-click on the Taskbar, then on the Task Manager item.
3. Click the Startup tab.
4. To remove a program from autoloading, select it from the list and disable it by clicking the Disable button in the lower right corner of the window.

Step 7: Contact Microsoft Support

Microsoft offers several solutions for removing the blue screen error can be removed using the Update Center or by contacting Windows support.

1. Go to the Microsoft support site.
2. Enter the code and error message in the search box and follow the recommendations found.
3. If you do not find a ready-made solution, then ask a question in the community – perhaps a certified system administrator will answer you.

Step 8: Install the latest system updates

With updates, Windows complements the driver database, fixes errors and security vulnerabilities. Download the latest updates to get rid of the error.

You can start Windows Update as follows:

1. Go to the Start menu and select Settings.
2. In the Parameters window, go to the Update and Security menu.
3. To install the latest Windows updates, click the Check for updates button and wait until the process of finding and installing them is complete.

It is recommended that you configure automatic downloading and installation of operating system updates using the Advanced Options menu

To enable automatic system update, you need to start Windows Update :

1. Go to the Start menu and select Settings.
2. In the Options window, go to the Update and Security menu and select the Windows Update submenu. To install the latest Windows updates, click the Check for updates button and wait until the process of finding and installing them is complete.
3. Go to Advanced Options and select how to install updates – Automatic.

Step 9: Run a system scan for viruses

“Blue screen of death” with an error can cause a computer virus that has infected Windows.

To check the system for viruses, run the antivirus program installed on your computer.

Modern antiviruses allow you to check both hard drives and RAM. Perform a full system check.

Step 10: Run a RAM check

You can check your blue screen of death reason by checking your ram.

Memory problems can lead to errors, loss of information or termination of the computer.

Before checking the RAM, unplug it from the connector on the computer motherboard and reinsert it into it.

Sometimes the error is caused by a memory stick that is inserted incorrectly or not tightly into the connector, or the connector pins are clogged.

If the proposed actions did not lead to a positive result, the operability of the RAM could be checked using the operating system using the Windows memory checker.

There are two ways to launch the Windows Memory Checker tool:

• Using the Control Panel: Go to Control Panel / System and Security /Administration. Launch the Windows Memory Checker application.
• Using the Run tool: Run the Run via keystrokes Windows + R . Type mdsched and press Enter. Then the Windows validator opens.

To start the scan, select one of the suggested options, the RAM check according to which will be started after the computer restarts.

If, as a result of the test, errors are identified that cannot be corrected, then such memory must be replaced (the memory module with malfunctions must be replaced).

Is the error fixed? Leave feedback and ask your questions in the comments.