If you are a user of the Windows 10 operating system, then you are probably already familiar with the Blue Screen of Death.
However, some users have noticed the appearance of the Red screen of death.
After its appearance, you can do absolutely nothing, and therefore you have to turn to an emergency reboot.
What are the causes of the appearance of the Red screen of death and how to get rid of it?
In most cases, the Red screen of death on Windows 10 appears as a result of errors in the hardware components of the system.
Especially often this problem occurs after an attempt to disperse them.
Table of Contents
Content of the article
Ways to solve the red screen of death Windows 10
Solution # 1 Remove hardware overclocking
Solution # 2 BIOS / UEFI update
Solution # 3 Check the hardware components
Solution # 4 Temperature Check
Solution # 5 Reinstalling the video driver
Ways to solve the red screen of death Windows 10
The red screen of death is a rather unusual problem experienced by an extremely small number of users. Nevertheless, it can be resolved with the help of quite familiar to many solutions. Let’s look at them.
Solution # 1 Remove hardware overclocking
In order to improve the performance of their equipment, users often resort to overclocking their CPU or Graphics Accelerator.
Acceleration is a change in the operating frequencies of particular equipment.
True, this procedure improves performance, but it also increases heat production.
Due to an increase in operating temperature, your CPU or GPU may become unstable.
In the worst case, we may permanently damage your equipment if you are not careful.
If you recently tried to overclock this or that equipment and saw in front of you the Red screen of death on Windows 10, then you should definitely remove this overclocking.
Usually, this can be done through the BIOS / UEFI or Afterburner settings, if you increased the operating frequencies for the video card.
Solution # 2 BIOS / UEFI update
Sometimes, the Red screen of death on Windows 10 may arise due to your BIOS / UEFI.
More precisely, the problem may arise in connection with its outdated version.
Updating the BIOS / UEFI is not a procedure for beginners, because if you do not have the proper knowledge and training, you can cause serious damage to your computer.
To update the BIOS / UEFI, you need to visit the official website of the manufacturer of your motherboard and download the latest BIOS / UEFI.
Most motherboard manufacturers have BIOS / UEFI update instructions on their web site, so be sure to contact them if you have one to avoid any unwanted problems.
However, if you do not know anything about the update process, then we recommend that you contact a specialist or material describing it.
Solution # 3 Check the hardware components
In some cases, the red screen of death can be caused by problems with the hardware components of the computer.
Some users reported that they had a graphics accelerator at the root of the problem.
Be sure to check that the cable connected to a particular interface is securely fastened.
There were also messages in which users claimed that the problem of the Red Death screen was a CD / DVD-drive.
Alternatively, you can disconnect your drive from the system, and then try to start the computer. If your PC really starts up fine without it, then the problem is definitely in the CD / DVD-drive.
However, RSoD can appear with problems with other parts of the PC, so you will need to carry out a thorough check.
If your computer is still under warranty, then the idea of taking it to a service center is quite reasonable.
Solution # 4 Temperature Check
As we mentioned in the first solution, overclocking increases the operating temperature. However, the temperature of one or another equipment in your system could increase without it.
For example, thermal grease placed between the radiator and the CPU itself could dry out, as a result of which the temperature began to rise.
The same can happen with a video card. Any other hardware in your PC, such as a motherboard, power supply, etc., may also start to overheat.
Check the temperature of the hardware components of the PC can be using all sorts of software. For example, you can use such utilities as SpeedFan, CoreTemp, GPU Temp and others.
Using them is quite simple, so you shouldn’t have any problems. If you actually find overheating, then eliminate them, and the Red Death screen will probably also be eliminated.
Solution # 5 Reinstalling the video driver
Let’s go back to the graphics accelerators. Some users noted that the Red screen of death in their case was caused by a driver for a video card that was malfunctioning.
You can try to reinstall the driver for your video card. First, you need to remove your current driver.
And then download the new driver version from the GP manufacturer’s website and install it.
To remove the driver, you need to do the following:
- Right-click on Start and select “Device Manager.”
- Go to the section “Video adapters” and click on the name of the video card with the right mouse button.
- Select “Remove Device.”
After uninstalling, install the new driver version. If the problem really was in the graphics driver, then the Red screen of death should be eliminated.
